300-615 Troubleshooting Cisco Data Center Infrastructure (300-615 DCIT) Exam

By
With
Comments Off on 300-615 Troubleshooting Cisco Data Center Infrastructure (300-615 DCIT) Exam

Description
Welcome to CCNP Data Center 300-615 DCIT Troubleshooting Cisco Data Center Infrastructure Exam Simulation Questions course.

In this course you will test your knowledge of CCNP Data Center exam topics, Nexus and important and useful subjects for your profession.

This exam tests your knowledge of troubleshooting a data center infrastructure, including:
Network
Compute platforms
Storage network
Automation
Management and operations

You want to see whether you are ready for your exam or not without paying too much for a repeat exam. You want to pass CCNP Data Center for the first time or you failed and now you want to pass it this time, this course will create the difference between your passing and failing on your next attempt. I wish you the best and want you to join me through different tests to challenge you.

1.1 Troubleshoot routing protocols
1.1.a OSPFv2, OSPFv3
1.1.b MP-BGP
1.1.c PIM
1.1.d FHRP (HSRP, VRRP)

1.2 Troubleshoot switching protocols, such as RSTP+, LACP, and vPC

1.3 Troubleshoot overlay protocols, such as VXLAN EVPN and OTV

1.4 Troubleshoot Application Centric Infrastructure
1.4.a Fabric discovery
1.4.b Access policies
1.4.c VMM domain integration
1.4.d Tenant policies
1.4.e Packet flow (unicast, multicast, and broadcast)
1.4.f External connectivity

2.1 Troubleshoot Cisco Unified Computing System rack servers

2.2 Troubleshoot Cisco Unified Computing System blade chassis
2.2.a Infrastructure such as chassis, power, IOM
2.2.b Network (VLANs, pools and policies, templates, QoS)
2.2.c Storage (SAN connectivity, FC zoning, VSANs, pools, policies, templates)
2.2.d Server pools and boot policies

2.3 Troubleshoot packet flow from server to the fabric

2.4 Troubleshoot hardware interoperability
2.4.a Converged Network Adapters / port expanders
2.4.b Firmware
2.4.c I/O modules / FEX
2.4.d Fabric interconnects

2.5 Troubleshoot firmware upgrades, packages, and interoperability

3.1 Troubleshoot Fibre Channel
3.1.a Switched fabric initialization
3.1.b Fibre Channel buffer credit starvation
3.1.c FCID
3.1.d Cisco Fabric Services
3.1.e Zoning
3.1.f Device alias
3.1.g NPV and NPIV
3.1.h VSAN

3.2 Troubleshoot FCoE Cisco Unified Fabric (FIP, DCB)

4.1 Troubleshoot automation and scripting tools
4.1.a EEM
4.1.b Scheduler

4.2 Troubleshoot programmability
4.2.a Bash shell and guest shell for NX-OS
4.2.b REST API
4.2.c JSON and XML encodings

5.1 Troubleshoot firmware upgrades, packages, and interoperability

5.2 Troubleshoot integration of centralized management


5.3 Troubleshooting network security
5.3.a Fabric binding and port security
5.3.b AAA and RBAC
5.3.c First-hop security such as dynamic ARP, DHCP snooping, and port security
5.3.d Troubleshoot CoPP

5.4 Troubleshoot ACI security domains and role mapping

5.5 Troubleshoot data center compute security
5.5.a Troubleshoot AAA and RBAC
5.5.b Troubleshoot key management

5.6 Troubleshoot storage security
5.6.a AAA and RBAC
5.6.b Port security
5.6.c Fabric binding

What you’ll learn
You will be ready for your CCNP Data Center exam and you will be able to test your knowledge
You will get better at your job which involves Cisco Data Center and Routing & Switching devices.
You will have great understanding for your daily profession

Are there any course requirements or prerequisites?
A Level of Data Center Knowledge
Desire to learn more
Desire to test yourself before THE BIG DAY arrives

Examkingdom Cisco 300-615 Exam Brain dump pdf , Certkingdom Cisco 300-615 Brain Dumps PDF

MCTS Training, MCITP Trainnig

Best Cisco 300-615 Certification, Cisco 300-615 Brain Dumps Training at certkingdom.com

QUESTION 1
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered.
Which two actions need to be attempted to resolve the issue? (Choose two.)

A. Configure the NVE interfaces to be Up on both switches.
B. Set a different distributed gateway virtual MAC address.
C. Set a different secondary IP addresses on NVE source-interface.
D. Configure the same VNI to multicast group maping.
E. Set a different primary IP addresses on NVE source-interface.

Answer: A,D

QUESTION 2
A mission-critical server is connected to site
A. Connectivity to this server is lost from site B because the MAC
route is missing in the OTV VDC of the Cisco Nexus 7000 in site B due to MAC aging.
Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?

A. Use route map to statically advertise this MAC and redistribute with IS-IS.
B. Unknown unicast flooding is not allowed.
C. Use the otv flood mac <> command to selectively flood traffic for a given MAC.
D. Use the otv isis bfd <> command to configure BFD protocol.

Answer: B

QUESTION 3
The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS.
The switches are connected using port channel and are experiencing packet loss. Which action should be performed on the
Cisco Nexus switch ports to resolve this issue?

A. Turn on lacp suspend-individual.
B. Turn on lacp graceful-convergence.
C. Turn off lacp graceful-convergence.
D. Turn off lacp suspend-individual.

Answer: C

QUESTION 4
An engineer troubleshoots a fabric discovery failure. Which two requirements about switch connectivity must
be verified to solve the problem? (Choose two.)

A. A Cisco APIC must be attached to a spine node only.
B. A Cisco APIC must be attached to leaf nodes.
C. Spine nodes must connect to other spine nodes.
D. A Cisco APIC must be dual-attached to two separate spine nodes.
E. Leaf nodes must connect to spine nodes only.

Answer: B,E

QUESTION 5
A customer configures HSRP between two data centers that are interconnected with OTV. The configuration
succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay.
Which two actions optimize the traffic? (Choose two.)

A. Disable first-hop redundancy.
B. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices.
C. Filter HSRP by using a Layer 2 MAC list on the ESXi vSwitch.
D. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch.
E. Filter HSRP by using a Layer 2 MAC list on the OTV edge devices.

Answer: A,B
 

Click to rate this post!
[Total: 0 Average: 0]