300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) Exam

Duration: 90 minutes
Available languages: English, Japanese

Exam overview
This exam tests your knowledge of implementation and troubleshooting for advanced routing technologies and services, including:

Layer 3
VPN services
Infrastructure security
Infrastructure services
Infrastructure automation

What you’ll learn in this course
The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) v1.0 gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0 course.

This course helps prepare you to take the exam, Implementing Cisco® Enterprise Advanced Routing and Services (300-410 ENARSI), which leads to the new CCNP® Enterprise and Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certifications. The exam will be available beginning February 24, 2020.

Course duration
Instructor-led training: 5 days with hands-on lab practice
Virtual instructor-led training: 5 days of web-based classes with hands-on lab practice
E-learning: Equivalent of 5 days of instruction with hands-on lab practice

How you’ll benefit

This course will help you:
Gain the knowledge you need to install, configure, operate, and troubleshoot an enterprise network
Qualify for professional-level job roles in advance routing and services
Prepare for the Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam, which will be available beginning February 24, 2020

What to expect in the exam
This course will help you prepare for the Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam. This exam tests your knowledge of implementation and troubleshooting for advanced routing technologies and services. The exam will be available beginning February 24, 2020.

After you pass 300-410 ENARSI:
You earn the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification.
You satisfy the concentration requirement for the new CCNP Enterprise certification. To complete your CCNP Enterprise certification, pass the Enterprise core exam, Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR).

Who should enroll
Enterprise network engineers
System engineers
System administrators
Network administrators

Technology areas
Enterprise networking
Routing and switching

Course details
Objectives

After taking this course, you should be able to:
Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
Optimize OSPFv2 and OSPFv3 behavior
Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
Implement route redistribution using filtering mechanisms
Troubleshoot redistribution
Implement path control using Policy-Based Routing (PBR) and IP service level agreement (SLA)
Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
Optimize MP-BGP in IPv4 and IPv6 environments
Troubleshoot MP-BGP for IPv4 and IPv6
Describe the features of Multiprotocol Label Switching (MPLS)
Describe the major architectural components of an MPLS VPN
Identify the routing and packet forwarding functionalities for MPLS VPNs
Explain how packets are forwarded in an MPLS VPN environment
Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
Implement Dynamic Host Configuration Protocol (DHCP)
Describe the tools available to secure the IPV6 first hop
Troubleshoot Cisco router security features
Troubleshoot infrastructure security and services

Before taking this course, you should have:
General understanding of network fundamentals
Basic knowledge of how to implement LANs
General understanding of how to manage network devices
General understanding of how to secure network devices
Basic knowledge of network automation

These Cisco courses are recommended to help you meet these prerequisites:
Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0
Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0

Outline
Implementing EIGRP
Optimizing EIGRP
Troubleshooting EIGRP
Implementing OSPF
Optimizing OSPF
Troubleshooting OSPF
Implementing Internal Border Gateway Protocol (IBGP)
Optimizing BGP
Implementing MP-BGP
Troubleshooting BGP
Configuring Redistribution
Troubleshooting Redistribution
Implementing Path Control
Exploring MPLS
Introducing MPLS L3 VPN Architecture
Introducing MPLS L3 VPN Routing
Configuring Virtual Routing and Forwarding (VRF)-Lite
Implementing DMVPN
Implementing DHCP
Troubleshooting DHCP
Introducing IPv6 First Hop Security
Securing Cisco Routers
Troubleshooting Infrastructure Security and Services

Lab Outline
Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
Verify the EIGRP Topology Table
Configure EIGRP Stub Routing, Summarization, and Default Routing
Configure EIGRP Load Balancing and Authentication
LAB: Troubleshoot EIGRP Issues
Configure OSPFv3 for IPv4 and IPv6
Verify the Link-State Database
Configure OSPF Stub Areas and Summarization
Configure OSPF Authentication
Troubleshoot OSPF
Implement Routing Protocol Redistribution
Manipulate Redistribution
Manipulate Redistribution Using Route Maps
Troubleshoot Redistribution Issues
Implement PBR
Configure IBGP and External Border Gateway Protocol (EBGP)
Implement BGP Path Selection
Configure BGP Advanced Features
Configure BGP Route Reflectors
Configure MP-BGP for IPv4 and IPv6
Troubleshoot BGP Issues
Implement PBR
Configure Routing with VRF-Lite
Implement Cisco IOS DMVPN
Obtain IPv6 Addresses Dynamically
Troubleshoot DHCPv4 and DHCPv6 Issues
Troubleshoot IPv4 and IPv6 Access Control List (ACL) Issues
Configure and Verify Control Plane Policing
Configure and Verify Unicast Reverse Path Forwarding (uRPF)
Troubleshoot Network Management Protocol Issues: Lab 1
Troubleshoot Network Management Protocol Issues: Lab 2

QUESTION 1
Automatic 6-to-4 tunnels exist between dual-stack routers (A, B, and C). One router has the IPv6 address,
Which of the following addresses is the IPv4 address of the router with the IPv6 address

A. 10.176.15.131
B. 10.200.80.67
C. 208.48.107.192
D. 208.138.16.110

Correct Answer: C

Explanation:
The IPv4 address of the IPv6 router is 208.48.107.192. In an automatic 6-to-4 tunnel, IPv6 addresses have the
2002::/16 prefix. The 32-bit IPv4 address of the IPv6 router is then embedded into the IPv6 address. The 32
bits of the IPv4 address is embedded in the second and third quartet of the IPv6 address. The second and
third quarters in the IPv6 address correspond to D030:6BC0. The conversion of these hexadecimal digits into
decimal is given as follows:
The IPv6 router does not have 10.176.15.131 as its IPv4 address. The 10.176.15.131 address is the IPv4
equivalent of the second and third quarter (05B0:0F81) in the source IPv6 address.
The other two IPv4 addresses are incorrect as they pertain to neither of the two IPv6 hosts.
Objective:
Network Principles
Sub-Objective:
Recognize proposed changes to the network
References:
Cisco IOS IPv6 Implementation Guide > Implementing Tunneling for IPv6

QUESTION 2
You have recently joined a company as the network administrator. You have been asked to complete the
configuration on the border routers for an automatic 6-to-4 tunnel between several IPv6 network domains. The
commands that are currently configured on the routers are as follows:
ipv6 route tunnel
interface tunnel
ipv6 address
tunnel source
Which of the following additional commands is required to complete the configuration of automatic 6-to-4 tunnel on the border routers?

A. tunnel mode ipv6ip
B. tunnel mode ipv6ip 6to4
C. tunnel mode ipv6ip auto-tunnel
D. tunnel mode ipv6ip isatap

Correct Answer: B

QUESTION 4
An automatic IPv4-compatible IPv6 tunnel exists between two IPv6 networks. The two IPv6 networks belong to
different BGP autonomous systems (AS). The tunnel source has the IPv4 address 172.168.111.65/24 and the
tunnel destination has the IPv4 address 172.168.222.80/24.
Which of the following statements is TRUE about the tunnel source and tunnel destination IPv6 addresses?
(Choose two.)

A. the IPv6 address of the tunnel source is 172.168.111.65::
B. the IPv6 address of the tunnel source is ::172.168.111.65
C. the IPv6 address of the tunnel destination is 172.168.222.80::
D. the IPv6 address of the tunnel destination is ::172.168.222.80

Correct Answer: BD