By Exam Number 642-732 CUWSS
Associated Certifications CCNP Wireless
Duration 75 minutes (50 – 60 questions)
Available Languages English
Register Pearson VUE
The CUWSS Conducting Cisco Unified Wireless Site Survey exam is the exam associated with the CCNP Wireless certification. This exam assesses a candidate’s capability to plan and conduct a wireless site survey, to design the RF network and to conduct a post installation assessment to ensure compliancy. Candidates can prepare for this exam by taking the CUWSS Conducting Cisco Unified Wireless Site Survey course.
The Conducting Cisco Unified Wireless Site Survey (CUWSS) version 2.0 642-732 exam is a 75-minute test with 45−65 questions that are associated with the Cisco CCNP® Wireless certification. This exam assesses a candidate’s ability to plan and conduct a wireless site survey, design the RF network, and conduct a post installation assessment to ensure compliance. The exam is closed book and no outside reference materials are allowed.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
1.0 Prepare for the Site Survey 16%
1.1 Identify customer requirements
1.1.a Business and RF application needs (voice, data, location)
1.1.b Industry vertical
1.1.c Customer questionnaire
1.2 Identify customer facility requirements
1.2.a Single floor
1.2.b Multi floor
1.2.c Campus (indoor and outdoor)
1.2.d Warehouse
1.2.e Obtain digital floor plans from customer
1.3 Identify customer requirements for type of client devices
1.4 Identify regulatory issues
1.4.a Country codes (-e, -i, -a, -n)
1.5 Identify safety and aesthetic considerations
1.5.a NEC ratings
1.5.b Fire codes
1.5.c OSHA
1.5.d MSHA
1.5.e Site-specific hazard awareness
1.6 Assess existing network infrastructure
1.7 Assess logistical considerations
1.7.a Resources
1.7.b Time
1.7.c Access
1.7.d Deployment requirements
1.8 Determine IEEE 802.11n impact on network infrastructure
2.0 Plan for the Site Survey 16%
2.1 Select proper survey model
2.1.a Data
2.1.b Voice
2.1.c Video
2.1.d Location
2.1.e Bridging (point-to-point; point-to-multipoint)
2.1.f Hybrid
2.2 Determine proper deployment characteristics
2.2.a Dense deployment
2.2.b Highly mobile (many cells, high reliability, and fast-moving clients) versus nomadic (temporary position)
2.2.c Indoor and outdoor mesh
2.2.d Use predictive Cisco WCS planning tools
2.3 Select survey equipment
2.4 Determine site survey best practices for customer environment
2.5 Identify impact of material attenuation
2.6 Identify survey documentation needed for customer report
3.0 Conduct the Site Survey 30%
3.1 Conduct a layer 1 survey (Cisco Spectrum Expert)
3.2 Select proper antenna to conduct the site survey
3.3 Conduct the layer 2 site survey for indoor environment
3.3.a Select proper access point to conduct the site survey (use what is purchased)
3.3.b Configure access point
3.3.c Survey with proper client
3.3.d Utilize proper survey techniques
3.4 Conduct the layer 2 site survey for outdoor point-to-point and point-to-multipoint networks
3.5 Conduct the layer 2 site survey for outdoor mesh network
4.0 Design the RF Network 12%
4.1 Determine infrastructure requirements
4.1.a AC power and PoE
4.1.b Understand cable plant considerations
4.1.c Mounting considerations: NEMA
4.1.d Outdoor grounding and lightning protection
4.1.e Rack capacity
4.1.f Switch port capacity
4.2 Determine the AP count and subsequent controller and license requirements
4.2.a Autonomous versus controller-based deployment
4.3 Generate the WLAN design documentation
4.3.a Indoor
4.3.b Outdoor mesh
4.3.c Outdoor point-to-point and multipoint
5.0 Conduct Post-Deployment Assessment 26%
5.1 Verify RF coverage
5.1.a Utilize tools (for example, air magnet) for audit
5.1.b RRM, controller, network appliance tweaks
5.2 Verify network applications and performance
5.2.a Apply WCS tools (voice readiness, location readiness, site calibration)
5.3 Reconcile any deployment issues
5.4 Assemble and deliver installation report to customer
QUESTION 1
During the site survey kick-off meeting with your customer, they ask why you need to verify the existing network infrastructure. Which two reasons do you give them? (Choose two.)
A. You need to verify the make, model, and software versions of all the equipment that will connect to the WLAN components in order to ensure compatibility.
B. You need to verify that the equipment the WLAN components will connect to has sufficient memory capacity to support the additional WLAN connections.
C. You need to verify that there are sufficient switch ports to support the new WLAN connections.
D. You need to verify that the switches the WLAN components will connect to can supply 802.3af inline power, and that they have sufficient ports to support all the new WLAN devices.
E. Depending on the type of APs that are planned for, the deployment may require different types of PoE to be supplied by the LAB switches.
Answer: C,D
QUESTION 2
You have a customer that is building a new campus of four 3-story buildings that you have just completed the site survey for. The customer is interested in the amount of rack space they will need to allocate in either the building MDF or in the data center for controllers.
Each building is going to require 75 APs to support voice and data. How should the controllers be deployed to provide the least number of controllers, the highest redundancy, and the easiest management?
A. Use the distributed deployment method in each building MDF with the N + N redundancy method.
B. Use the centralized deployment method in the data center with the N + N + 1 redundancy method.
C. Use the distributed deployment method in each building MDF with the N + 1 redundancy method.
D. Use the centralized deployment method in the data center with the N + 1 redundancy method.
E. Use the distributed deployment method in each building MDF with the N + N +1 redundancy method.
F. Use the centralized deployment method in the data center with the N + N redundancy method.
Answer: B
QUESTION 3
What is the result of a Cisco 1250 AP deployed for 802.11a/b/g/n using optimized power (16.8 W) with software version 7.0?
A. One spatial stream per radio
B. One spatial stream on 2.4 GHz and two spatial streams on 5 GHz
C. One spatial steam on 5 GHz and two spatial streams on 2.4 GHz
D. Reduced power on both radios
E. Reduced power on 2.4 GHz radio only
F. Reduced power on 5 GHz radio only
Answer: E
QUESTION 4
Which piece of information gathered during a WLAN site survey should be included in the customer report?
A. Analysis of server location and applications supported.
B. Analysis of fiber-optic backbone infrastructure.
C. Output from Cisco WCS Location Quality Inspector.
D. Output from Cisco WCS VoWLAN Voice Readiness Tool.
E. Output from Cisco WCS Planning Mode Tool.
Answer: E
QUESTION 5
In evaluating a post-installation WLAN deployment, problems are occurring when a client roams from one AP to another. The client bounces back and forth between APs. Which three items can be checked to resolve this issue? (Choose three.)
A. When a client roams from one AP to the next, check the client RSSI and SNR levels for both APs at the roaming point.
B. Simplify 802.1X/EAP by moving from external RADIUS to local authentication.
C. Verify the authentication being used for the same test that the client would use under production.
D. Check if the roaming settings in the AP are set properly for non-CCX clients.
E. Check the RF levels of the first AP as the client moves toward the second AP.
F. Check that the client roaming parameters are set properly.
Answer: A,C,E
Click here to view complete Q&A of 642-732 exam
Certkingdom Review
Best Cisco 642-732 Certification, Cisco 642-732 Training at certkingdom.com
No Comment